Once you have accessed your BIOS and made any necessary changes, you can choose to reinitiate the Fastboot if you want.
#Msi quickboot manual
Consult your motherboard manual to find these connectors. If this does not work you can branch the the CMOS reset connectors on the motherboard. Re-attach the battery and now reboot the computer pressing Delete key or F8 or F2 (etc.) keys to reach the BIOS. Now hold down the power button to drain any residual power from the motherboard. Click on the Exit icon, then select Save Changes and Exit. Select the Enable Fast or Ultra Fast option that you want to enable. Click on the Boot icon, and then click on the Fast Boot setting option right in the middle of the screen. Open the case and identify the CMOS battery – it is like a big hearing-aid battery. Boot to the designated firmware settings. Make sure you and the computer are grounded and protected from static, as static can be very damaging, even fatal, to your delicate components. Instructions: Turn off and disconnect your computer from current. If you need to reset the BIOS manually, you can do this by removing the battery from the motherboard or physically branching the CMOS reset connectors on the motherboard.
#Msi quickboot how to
This diagnostic screen very often includes instructions on how to enter the setup utility as well and now that the BIOS is actually waiting for you to do something, it's often a trivial matter to get into the setup utility.Ĭertain Windows Fastboot systems do not give access to the BIOS, requiring you to reset the BIOS manually to access them. Many BIOSes treat this as at least a warning, and will give you a diagnostic screen telling you to check your keyboard and do something (most often to press a key) to continue booting. What this does is basically cause the BIOS to see a "stuck key" condition on the keyboard the same as if a keyboard contact was actually stuck, but in this case, triggered intentionally. Plugin my old 1080ti for a quick boot test to see if it post. (If the OS starts to load, this trick didn't work for you.) Apart from MSI Fast Boot, there are some other ones provided by MSI, including MSI Command. Do not release the key before the OS starts to load, if it does. Control, Windows, Print Screen and such are usually "safer" in light of any firmware on extension cards etc.) Now, while holding that key down, turn on the computer. Then, before turning it on, press and hold a key on your keyboard. I don't know if this will work on your specific motherboard. Here's an old hat trick that just might work for you, and others in similar situations.
0 kommentar(er)
